Official Blog

Blog of smartDIYs who wish to create more excitement in this world where people can freely form their ideas in shapes.
Check it out for information about DIY with laser cutter and engraver, and our activities.

April, 2017


Engraving Bamboo and White Cardboard

  Check out the result of engraving bamboo and white cardboard! Material: Bamboo (handle of fan), white cardboard Machine: FABOOL Laser Mini 1.6W Processing data: Download the data here. Processing Parameter   1. Bamboo (handle of fan) Speed: 300F Power: 30% Procesing time: about 1 min 30 sec   2. White cardboard Speed: 400F Power:… Read more »


Engraving Silicon Rubber

  Check out the result of engraving silicon rubber with FABOOL Laser CO2 and FABOOL Laser Mini 1.6W model. Material: Blue silicon rubber Machine: FABOOL Laser CO2, FABOOL Laser Mini 1.6W Processing data: Data is available for download here. Processing parameter   1. FABOOL Laser CO2 (raster) Speed: 1000F Power: 10% Processing time: about 4… Read more »


Cutting Sponge Abrasive and Sand Paper

  Check out the result of sponge abrasive and sand paper cutting done with FABOOL Laser Mini. Material: – sponge abrasive 4.5mm, – sponge abrasive + double-sided tape 4.5mm+0.5mm, – sand paper 6mm Machine: FABOOL Laser Mini 3.5W Processing data Download the data here. Processing parameter   1. Sponge abrasive Speed: 100F Power: 100% Repeats:… Read more »


Cutting Synthetic Paper

  Check out the cutouts of synthetic paper cut with FABOOL Laser Mini! Material: synthetic paper (pattern paper used for stencil) Machine: FABOOL Laser CO2 / FABOOL Laser Mini 3.5W Processing data: Download the data here. Processing Parameter 1. Synthetic Paper FABOOL Laser CO2 Speed: 1500F Power: 30% Processing time: about a minute and 3… Read more »


Engraving PA/PBT/PPS

  Check out the result of engraving PA, PBT, and PPS! Material: PA(polyamid), PBT(Polybutylene terephthalate), PPS(Polyphenylene sulfide) Machine: FABOOL Laser CO2 Processing data: Processed data is available for download here. Processing parameter 1.PA Speed: 1000F Power: 10% Processing time: about 2 seconds 2.PBT Left Speed: 1000F Power: 10% Right Speed: 1000F Power: 15% Processing time:… Read more »


Cutting Polypropylene

  Check out the result of cutting polypropylene! Material: Polypropylene Thickness: 0.75mm Machine: FABOOL Laser CO2 Processing data: The data is available for download here. Processing parameter 1. Speed: 1000F Power: 100% Processing time: about 28 seconds The cutting line has bulge on the side due to melting. 2. Speed: 800F Power: 100% Processing time:… Read more »


Cutting Special Polyolefin Film

  We are introducing the cutting result of special polyolefin film! Material: special polyolefin film (main component polypropylene) One side is acrylic adhesive Machine: FABOOL Laser CO2 Processing data: The data is available for download here. Processing Parameter 1. Special polyolefin film 200 Speed: 8000F Power: 70% Processing time: about 7 seconds We tried to… Read more »