Blog of smartDIYs who wish to create more excitement in this world where people can freely form their ideas in shapes.
Check it out for information about DIY with laser cutter and engraver, and our activities.
Check out the result of engraving PA, PBT, and PPS! Material: PA(polyamid), PBT(Polybutylene terephthalate), PPS(Polyphenylene sulfide) Machine: FABOOL Laser CO2 Processing data： Processed data is available for download here. Processing parameter 1.PA Speed: 1000F Power: 10% Processing time: about 2 seconds 2.PBT Left Speed: 1000F Power: 10% Right Speed: 1000F Power: 15% Processing time:… Read more »
Check out the result of cutting polypropylene! Material: Polypropylene Thickness: 0.75mm Machine: FABOOL Laser CO2 Processing data： The data is available for download here. Processing parameter 1. Speed: 1000F Power: 100% Processing time: about 28 seconds The cutting line has bulge on the side due to melting. 2. Speed: 800F Power: 100% Processing time:… Read more »
We are introducing the cutting result of special polyolefin film! Material: special polyolefin film (main component polypropylene) One side is acrylic adhesive Machine: FABOOL Laser CO2 Processing data: The data is available for download here. Processing Parameter 1. Special polyolefin film 200 Speed: 8000F Power: 70% Processing time: about 7 seconds We tried to… Read more »
Hi everyone! Have you heard about the SXSW? It’s one of the largest exhibitions/festivals/events in the world! Jeff, one of our users did workshops with FABOOL Laser Mini at this years’ SXSW held in Texas from March 10th to 19th! Thank you Jeff for providing this opportunity for future users to try our machine! We… Read more »
Check out the result of laser cut and engraved leather! Material: genuine leather Thickness: 1.3mm Machine: FABOOL Laser Mini 3.5W Processing data: Processing parameter Cut Speed: 300F Power: 100% Repeat: 6 Engrave Speed: 500F Power: 10% Processing time: 33 mins The data can be downloaded from here. This is the result. You can see how… Read more »
Hi everyone! We have moved into a new office last week! The new address is the following. 3611-20 Iino Minami-Apls City, Yamanashi, 400-0222 We will use half of the building as storage and the other half as office. These pictures were taken on the day of moving, so it is still a big mess, but… Read more »
See the result of cutting shell sheets! Material： Shell sheet (shell of abalone) Thickness： 0.3mm Machine：FABOOL Laser Mini 1.6W, 3.5W Processing Data： Data can be downloaded from here. 1. FABOOL Laser Mini 1.6W Processing parameter Shell sheet (with coating sheet) Speed: 100F Power: 100% Repeat: 2 times Processing time: 4’24” Can be cut with… Read more »
Check out the result of engraving black plastic (frame of glasses) and glass (lens of glasses). Material：Temple of glasses（Cellulose acetate 60-80％, Diethyl phthalate 20-40％） Lens of glasses (plastic), lens of sunglasses (plastic) Thickness：Temple of glasses 4mm Lens of glasses 4mm, lens of sunglasses 4mm Machine：FABOOL Laser Mini 1.6W Processing Data： You can download the data… Read more »
Check out the result of sample cutting of synthetic leather and adhesive felt! Material: synthetic leather (white), adhesive felt (white, raised polyester) Thickness: synthetic leather 1mm and 2mm adhesive leather 0.5mm Machine: FABOOL Laser Co2 Processing data: This data is available for download here. Processing Parameter 1. Synthetic leather 1mm Speed: 1500F Power: 15%… Read more »
Today the world’s largest ready-to-assemble style laser cutter and engraver – FABOOL Laser CO2 – is finally launched globally! *Please note that due to restrictions we will not be shipping to EU countries at this moment. It uses 40W CO2 laser, which is much powerful than the FABOOL Laser Mini 1.6W or 3.5W models, and… Read more »