Cutting Clear Acrylic with CO2 Laser Cutter and Engraver

 

Check out the result of clear acrylic cut with CO2 laser cutter and engraver.

Material: Clear acrylic 3mm, 5mm, 10mm

Machine: FABOOL Laser CO2, FABOOL Laser DS

Processing data:
Download the data here.

Processing Parameter
 
1.FABOOL Laser CO2 3mm

  • Speed: 1500F
  • Power: 5%

Processing time: about 32 mins 2 sec


  • Speed: 1500F
  • Power: 10%

Processing time: about 2 mins 43 sec


  • Speed: 600F
  • Power: 100%

Processing time: about 16 sec


2. FABOOL Laser CO2 5mm

  • Speed: 300F
  • Power: 100%

Processing time: about 30 sec


3. FABOOL Laser CO2 10mm

  • Speed: 200F
  • Power: 100%
  • Repeat: 3

Processing time: 2 mins



4. FABOOL Laser DS 3mm

  • Speed: 2000F
  • Power: 15%

Processing time: about 24 mins 08 sec


  • Speed: 2000F
  • Power: 15%

Processing time: about 2 mins 03 sec


  • Speed: 900F
  • Power: 100%

Processing time: about 10 mins


5. FABOOL Laser DS 5mm

  • Speed: 500F
  • Power: 100%

Processing time: about 16 sec


6. FABOOL Laser DS 10mm

  • Speed: 500F
  • Power: 100%
  • Repeat: 5

Processing time: about 53 sec








You can get similar outcome of CO2 by adjusting the parameter of DS

 

Copyright 2018 smartDIYs Inc. All Rights Reserved.