Cutting and Engraving PE film with laser cutter



We are introducing the sample processing result of PE film!



Material: PE film (green, often used in Japanese lunch boxes as accessory)
Thickness: 0.3mm
Machine: FABOOL Laser CO2 / FABOOL Laser Mini (1.6W model)
Processing Data:
These can be downloaded from here.

Parameters
1. FABOOL Laser CO2 – Engraving

  • Speed: 4000F    
  • Power: 15%   

Processing time: about 2:25 minutes



2. FABOOL Laser CO2 - Cutting

  • Spped:3000F    
  • Power:30%   

Processing time: about 8 seconds



3. FABOOL Laser CO2 – Cutting

  • Speed: 3000F    
  • Power: 40%   

Processing time: about 35 seconds



4. FABOOL Laser Mini – Engraving

  • Speed: 1000F    
  • Power: 100%   

Processing time: about 8:30 minites



5. FABOOL Laser Mini – Cutting

  • Speed: 800F    
  • Power: 100%   

Processing time: about 10 seconds



6. FABOOL Laser Mini – Cutting

  • Speed: 800F    
  • Power: 100%   

Processing time: about 52 seconds



These were the results.
Although the small details are melted, the outcome looks better with FABOOL Laser Mini.




Copyright 2012 smart DIYs All Rights Reserved.