Cutting and Engraving Rubber and Rubber Cork

 

Have you ever tried cutting rubber or rubber cork or are interested in cutting them?
Check out the result!

Material: nitrile rubber (a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene), rubber cork
Thickness: nitrile rubber 2mm, 3mm / rubber cork 3mm
Machine: FABOOL Laser CO2

Processing data:
You can download the data here.

Processing parameter

1.Rubber (1st round)

  • Speed: 800F
  • Power: 100%
  • Repeating: 2

Processing time: about 40 seconds



Rubber (2nd trial)

  • Speed: 500F
  • Power: 100%
  • Repeating: 2

Processing time: about 1:41 minutes

It is not completely cut through at 500F.



Rubber (3rd trial)

  • Speed: 500F
  • Power: 100%
  • Repeating: 10

Processgin time: about 2:56 minutes

We tried cutting 3mm rubber, but it could not cut it through.



2.Rubber cork

  • Speed: 1000F
  • Power: 100%
  • Repeating: 15

Processing time: about 1:41 minute

Since the material was made with artificial rubber and cork particles, it could not be cut through as was the 3mm thick rubber.


Copyright 2012 smart DIYs All Rights Reserved.