|Work Area||41.3×24.8inch (1050×630mm)|
|Laser||80W CO2 Laser|
|Supported Processing Method||Vector engraving, Raster engraving|
|Supported OS||Windows7 and more, Mac10.11.6 El capitan and more|
|Supported File||png, jpeg, jpg, bmp, gif, tiff, tif, svg, dxf|
|Accessories||Protection glasses, USB cable, AC cable|
|Power Supply||AC110V (50Hz/60Hz) / AC220V (50Hz)|
|Operating temperature||68F (20℃) to 86F (30℃)|
|Continuous operating time||Under 30 minutes|
|A recommended environment||Temperature : 41F (5℃) to 104F (40℃), Humidity : 25% to 50%|
|Weight||About 198lbs (90kg)|
*Please refer to FAQ for other specifications.
*These specifications may change as the product upgrades.
- Laser radiation is very dangerous. Please watch for fire. It can cause burns and damage to the eyes if not careful. The user -is responsible for any damages and losses that may occur through the use of the machine.
- This product requires self-assembly. Please read the manual provided on our website beforehand.
- The edges of the acrylic plates and stainless steel plates are very sharp. Please wear gloves to prevent from cutting your hands.
- Please make sure that all screws and nuts are tightly fixed before operating the machine.
- Please read the instruction manual first to see whether it is feasible to assemble on your own.
- Product Warranty
- If there are any bugs or defects on parts, please report to us within 30 days of delivery. We will fix or exchange the machine free of charge. We cannot take care of any damages other than initial failures.
- Please do not use over 30 minutes continuously and at temperatures over 86F. Damages caused by not following these instructions will not be covered under warranty.