Frame Set for Expansion Manual

03. Installation of Pulley

Installation of Idler Pulley

Install idler pulley in red-circled hole.

installing-idler-pulley

Check the structure of idler pulley. Please be careful of the order and direction.

structure-idler-pulley

Insert M5×25 low head bolt in the hole in the direction shown in the picture.

inserting-bolt

Insert 3.5mm spacer. Disregard the direction.

inserting-spacer

Insert idler. Disregard the direction.

inserting-idler

Install M5 nylon nut. Watch for the direction.

inserting-nylon-nut

Tighten with a spanner and wrench.

tighten-nut

Assembly of FLM_mini v plate_R_2040_1m is completed.

assembly-completed
assembly-idler-pulley-completed
Copyright 2018 smartDIYs Inc. All Rights Reserved.