Frame Set for Expansion Manual
We use three wheels for one mini v plate for normal FABOOL Laser Mini, but use four wheels for one y-axis mini v plate for 1.0m extension kit.
For red-circled holes, install wheels equipped with eccentric spacer, and for blue-circled holes, normal spacers.
Please check the structure of a wheel. Please be careful of the order and direction. There are two wheels equipped with eccentric spacer and two wheels equipped with normal spacer.
This is the wheel equipped with eccentric spacer.
This is the wheel equipped with normal spacer.
Install the wheel with eccentric spacer. First, insert the M5×25 low head bolt in installation holes in the direction shown in the picture.
Insert the eccentric spacer in M5×25 low head bolt. Watch for the direction of eccentric spacer. Part of the eccentric spacer should go into the hole.
Insert sim for mini v wheel. Disregard the direction.
Insert wheel. Disregard the direction.
Install M5 nylon nut. Watch for direction.
Tighten with a spanner and wrench.
Install all four wheels.
Install wheels with eccentric spacer in red-circled holes, and wheels with normal spacer in blue-circled spacer.
Install four wheels in the same manner as earlier.