FABOOL Laser CO2 Manual

05. Motor Unit Assembly

Motor Unit Assembly

 

Parts List

 

 

Parts Detail Qty
wheel plate y-axis unit 2
wheel plate motor mount 1
Stepping motor 3
Timing pulley 3
M3×6 hex socket head cap bolt 12

 

 

Motor Unit Assembly

Attach stepping motor to wheel plate y-axis with M3×6 hex socket head cap bolts.

Firstly, assemble wheel plate y-axis R unit
The connector point of the motor faces to the front side like the picture below.
(※Don’t mistake the direction of wheel plate y-axis. Please see the picture carefully.)

Put timing pulley in stepping motor.
Loosen the set-screws of timing pulley.

Insert timing pulley into the axis of stepping motor as the same way as the picture below.

Tighten a bit the set-screws of timing pulley to fix. It does not have to adjust the exact position at this moment as it will be done later.

 

Assemble wheel plate y-axis L unit in the same way as R unit.
(※Don’t mistake the direction of wheel plate y-axis. Please see the picture carefully.)

 

Put timing pulley in stepping motor likewise.

Then attach stepping motor and timing pulley with wheel plate motor mount
(※Be careful of the direction of wheel plate motor mount. Please see the pictures carefully.)

Motor unit assembly is completed.

Copyright 2018 smartDIYs Inc. All Rights Reserved.