FABOOL Laser CO2 Manual

Optical Axis Adjustment #2/#3 Reflection Mirror

Reflection Mirror Adjustment

#2 Reflection Mirror Adjustment

Attach #2 reflection mirror to mirror mount.
adjustment-reflection-2-01

Radiate toward #3 reflection mirror.
Similar to the #2 mirror, start from the closest point.
#2 Reflection Mirror Adjustment
Radiate in the center of X-axis.
#2 Reflection Mirror Adjustment
Adjust the #2 mirror mount according to the deviation.

If it deviates greatly to the vertical direction, adjust by turning the aluminum frame that i fixing the 2 mirror mount.
#2 Reflection Mirror Adjustment
Make slight adjustments with adjustment screws on the mirror mount.
Make the deviation as small as possible when radiating from both close and far points.

#2 Reflection Mirror Adjustment
If it is deviating greatly in horizontal direction, turn the #2 mirror mount little by little to make adjustments.
*The picture below is capturing the mirror mount from above.

#2 Reflection Mirror Adjustmen
Make slight adjustments with adjustment screws on mirror mount.
After adjustment, check that it radiates in the center of #3 reflection mirror.
#2 Reflection Mirror Adjustmen

#3 Reflection Mirror Adjustment

Attach #3 reflection mirror.
#3 Reflection Mirror Adjustment
Radiate to the laser head part.
#3 Reflection Mirror Adjustment
If it deviates greatly in the horizontal direction (in the picture), adjust tilt of mirror mount of #3 reflection mirror.
#3 Reflection Mirror Adjustment
Make slight adjustments with adjustment screws on mirror mount.
Adjust the screws on mirror mount so that the laser radiates to the center when radiation toward laser head part.
#3 Reflection Mirror Adjustment
Check that laser is radiated in the center in all four corners of cutting area.
#3 Reflection Mirror Adjustment

#3 Reflection Mirror Adjustment #3 Reflection Mirror Adjustment #3 Reflection Mirror Adjustment

Condenser Lens Attachment

Attach condenser lens.
Watch for the orientation of it. The convex side is up.

Condenser Lens Attachment
Condenser Lens Attachment

Copyright 2018 smartDIYs Inc. All Rights Reserved.