|Water cooling hose||2m||1|
Attach the water cooling hose to water cooling pump.
*Please hold the water pump with hand when attaching the water cooling hose. If not, it might be broken because of too much pressure on the bottom.
Attach the hose to the exit side (The picture shows the other side).
Connect the hose on the exit side of water cooling pump to the side of laser tube that does not radiate laser (the side with LED DC fan.)
Cut the hose at an appropriate length when attaching.
Next, attach a hose to the entering side of water cooling pump (The picture shows the other side).
Connect the hose on the entering part of water cooling pump to the radiator.
Connect it to the hose fitting on the radiator. (Connect to the one in front as in the picture.)
Cut the hose at appropriate length.
Next, attach a hose to the side that radiates laser (#1 mirror side).
(The hose will be connected to the radiator through flow monitor.)
Attach flow monitor. Cut at the appropriate length.
(*Disregard the orientation of flow monitor.)
Connect it to the hose fitting on the back (in the picture) of radiator.
Cut at appropriate length.
Fix the hose with cable tie.
Cut the unnecessary part of tie.