FABOOL Laser CO2 Manual

06. X-axis Unit Assembly

X-axis Unit Assembly

 

Parts List

 

Parts Detail Qty
848mm V-Slot aluminum frame (20 x 40mm) 1
wheel plate motor mount unit 1
wheel plate x-axis unit 1

 

 

X-axis Unit Assembly

 

Unfix two nuts in the upper side from wheel plate x-axis like the picture below.
ナット取り外し

Set wheel plate motor mount unit in wheel plate x-axis. Please be careful of the direction.
wheel plate motor mountユニット取り付け

Put the two nuts which was removed back in the place.
※Fix firmly not to move wheel plate motor mount unit.
wheel plate motor mountユニット取り付け

Slide X-axis unit in 848mm V-slot.
X軸ユニットをスライドさせて入れ込む

Check X-axis unit whether it slides smoothly on V-slot.
スライド確認

Here is the movie of the proper slide on V-slot.

 

Please try to adjust the eccentric spacer with spanner if the slide does not work well.
For adjustment of eccentric spacer, please see “X-axis Assembly” –>”Structure and Adjustment of Eccentric Spacer” in the manual of FABOOL Laser Mini.

After adjustment, please take off X-axis unit from V-slot.
偏心スペーサー調整

X-axis Unit Assembly is completed.

Copyright 2018 smartDIYs Inc. All Rights Reserved.