FABOOL Laser Mini Manual

13. Installing Old Version of Software

*If you want to use FABOOL Laser Mini in the environment without internet, please install the old version of software by following the procedure below.
*If you are using the old version, please delete the new version of driver.

For Windows

Installing Driver

Download the driver for windows here and unzip the file.
Move the file to [Win7] folder for Windows 7 and to [Win8] for Windows 8.
Open and install [dpinst-amd64.exe] for 64bitOS and [dpinst-x86.exe] for 32bitOS.

Installing Python

Download python version 2.7 here.Then open python-2.7.10.msi.

Select [Install for all users] and click on [Next].
installing old veresion of software

Click on [Next].
installing old version of software

Click on [Add python.exe to Path] and select [Will be installed on local hard drive].
installing old version of software

Click on [Next].
installing old version of software

Installing Old Version of Software

Download here and unzip.
For the instruction, please see the Instruction for Software of Smart Laser Mini.

*Processing might stop if the PC goes into sleep mode while processing. Please disable sleep mode with the following instruction.
Disabling sleep mode (Win 10)
Disabling sleep mode (Win 7)

For Mac

Download here and unzip.
For the instruction, please see the Instruction for Software of Smart Laser Mini.

*Processing might stop if the PC goes into sleep mode while processing. Please disable sleep mode with the following instruction.
Disabling sleep mode (Mac)

Installing Python-Related Package.

Install Python related package from terminal.
Open terminal and enter [sudo apt-get install python-pip].
installing old version of software to Raspberry Pi

It will ask whether to install, so enter [Y].
installing older version of software to Raspberry Pi

Next, enter [sudo apt-get install python-dev].
installing old version of software to Raspberry Pi

It will ask again whether to install, so enter [Y].
installing old version of software to Raspberry Pi

Next, enter [sudo pip install Pillow].
Installing old version of software to raspberry Pi

Installing Old Version of Software

Download here and unzip.
For the instruction, please see the Instruction for Software of Smart Laser Mini.

Copyright 2018 smartDIYs Inc. All Rights Reserved.