Flame Damper Kit for FABOOL Laser CO2/DS Manual

Flame Damper Kit for FABOOL Laser CO2/DS

Parts Name Notes Pictures Qty
Compressor 1
Conversion tube 1
Converting fiting 1
Polyurethane Tube 1

Air Compressor Assembly

Connect Conversion tube to the tip of the Air Compressor.

Thrust the tube in as far as it will go.


Connect Converting fiting to the other tip of Conversion tube. Thrust the tube in as far as it will go.


Connect Polyurethane tube to the other tip of Converting fiting. Thrust the tube in as far as it will go.



Connecting Flame Damper Kit

Referring to the picture, connect Polyurethane tube to the Panel Touch Connector on the main body.
Thrust the tube in as far as it will go.

Check whether air is properly supplied through the tube to the processing area.

Copyright 2018 smartDIYs Inc. All Rights Reserved.