BackBack

FABOOL Laser DS

$5,380.00 USD

Ready-to-assemble laser cutter and engraver. It uses a high-power 80W CO2 laser tube, so it can cut and engrave wood and acrylic up to 0.59inch thick.

Hurry, there are only 8 item(s) left!
Description
Laser Cutter and Engraver

A Reasonably-priced High Power Laser Cutter

High-Power 80W Laser Tube

Large Working Area:41.3×24.8inch

Maximum thickness for cutting:0.59inch

Works on any material you can think of

Wooden

Leather

Cardboard

Paper

Fabric

Denim

Rubber

Anodized aluminum

Acrylic

Cork

Low Price

By using open source software and providing the buyer's self-assemble model, we created a low-priced laser cutter and engraver.

User-friendly Software

The free all-in-one software includes functions like creating and retrieving the processed data of products.

Open Source

FABOOL Laser series are open sauce, including all mechanical, electronical, and software. You can see all stractures.

Suggested Accessories

For optimal working height

Workbench

By placing the main body on top, it becomes the perfect height for getting your work done. Recommended because of the FABOOL Laser DS's relatively large size.

For fire prevention and safety

Flame Damper Kit

When using our high-power laser cutter, it is strongly recommended to use the Flame Damper Kit when processing materials that can emit fire. Flames are prevented by applying air to the irradiated part of the laser light using a compressor. *If you can not purchase a Flame Damper Kit, be sure to take other anti-inflammatory precautions.

For dispelling smoke / odors

Exhaust Fan Kit

An extension part for dispelling smoke and odors out of the working area. The FABOOL Laser DS comes pre-set with a ventilation port, making it possible to conveniently dispel smoke and odors accumulated in the product by connecting the exhaust duct.

For making mirror / lens adjustments easier

Optical Adjustment Button

Useful when performing optical axis (mirror / lens position) adjustments at the time of assembly and maintenance. Since the laser output can be controlled by hand with the press of a button, adjustments to the mirror and lens positions can be performed much easier. Laser output intensity can be adjusted by hand as well.

Spec

Work Area 41.3×24.8inch (1050×630mm)
Laser 80W CO2 Laser
Supported Processing Method Vector engraving, Raster engraving
Supported OS Windows7 and more, Mac10.11.6 El capitan and more
Supported File png, jpeg, jpg, bmp, gif, tiff, tif, svg, dxf
Accessories Protection glasses, USB cable, AC cable
Power Supply AC110V (50Hz/60Hz) / AC220V (50Hz)
Size 55.1×41.3×12.6inch (1400×1050×320mm)
Operating temperature 68F (20℃) to 86F (30℃)
Continuous operating time Under 30 minutes
A recommended environment Temperature : 41F (5℃) to 104F (40℃), Humidity : 25% to 50%
Weight About 198lbs (90kg)

*Please refer to FAQ for other specifications.

*These specifications may change as the product upgrades.

Caution
Laser radiation is very dangerous. Please watch for fire. It can cause burns and damage to the eyes if not careful. The user -is responsible for any damages and losses that may occur through the use of the machine.
Assembly
This product requires self-assembly. Please read the manual provided on our website beforehand.
The edges of the acrylic plates and stainless steel plates are very sharp. Please wear gloves to prevent from cutting your hands.
Please make sure that all screws and nuts are tightly fixed before operating the machine.
Please read the instruction manual first to see whether it is feasible to assemble on your own.
Product Warranty
If there are any bugs or defects on parts, please report to us within 30 days of delivery. We will fix or exchange the machine free of charge. We cannot take care of any damages other than initial failures.
Please do not use over 30 minutes continuously and at temperatures over 86F. Damages caused by not following these instructions will not be covered under warranty.